 |  |  |  |  |  |
| THE MAILSAVER™ |
| 1-866-434-9797 |
| © 2007 MailSaver™ |
Terms Privacy Policy Security
MailSaver™ INSTALLATION INSTRUCTIONS BEFORE INSTALLATION REMOVE KEYS FROM INSIDE MAIL BOX MailSaver™ is designed to be installed alone or with Brick, Stone, or Stucco Remove all shipping material which might be left attached. Set and Level MailSaver™ on a minimum 6”depth. (18”recommended) 2ft. X 2ft. square concrete pad depending on soil type. Attach MailSaver™ at the bottom with ½”X 3” expanding bolts to secure. (epoxy type glue in bolt holes is also recommended) Make sure MailSaver™ does not sit in a “water trap” at the base. Rear retrieval MailSaver™ models must have a steel angle iron 2"x 2" installed above rear retrieval door to support brick, stone, or stucco. Install brick, stone, or stucco and extend approximately ½” to 1” overhang at the front, or paint to your favorite color. |